Vintage Jewellery Recreation Part 2 - Emerald Earrings

Are you a matching person? Do you match your earrings, necklace and bracelets?  I’m not usually but this is something special.  You may remember a few weeks ago I recreated a vintage necklace that used to belong to my Mum.  What I couldn’t tell you at the time was that I was commissioned to do this by my brother-in-law for my sister’s birthday.

Vintage Necklace Recreation

She loved the necklace and asked if I could make some matching earrings. I had a few great ideas as to how I would make these earrings but after playing around with the beads for an entire afternoon, I decided that simple was best. I actually really love what eventuated.

This week, I’m sharing the earrings that I made to match the necklace. If you haven’t seen it, make sure you watch the necklace tutorial.

Materials

To make these earrings you will need:

Tools

The tools I used to make these earrings are:

Instructions

Watch the video or read the instructions below.

Open the Jump Rings

Before you start open all of the jump rings. This will make it much easier to attach them as you won’t have to put your work down when joining the rings together.

Make the Dangles

Thread one of the 8mm jump rings through the hole of one of the drops.  Close the jump ring.

Make the Connector

To make the connector, make a loop in the end of a piece of the wire.  I bent the wire over about 1cm from the cut end, then made my loop with that, using the very tip of my round nose pliers. If you’ve never made a loop before, use this technique.

Make sure that the loops are both facing the same way.

Connect the Pieces

Using a 4mm jump ring, attach the connector to the end 8mm jump ring of the dangle. Close the jump ring. Repeat so that you have two 4mm jump rings connecting to the dangle.

Attach the Ear Hook

The earhook is attached in the same manner as the dangle. Use a 4mm jump ring and connect the ear hook and the connector. Close the jump ring. Repeat.

Repeat the process for the other earring.

If you would like to see more tutorials, subscribe to our YouTube channel and ring the notification bell so you will never miss a thing.

Jewellery I’m Wearing

If you would like to make the necklace I’m wearing today, here’s the tutorial.  

Black Tears Necklace Tutorial

The earrings are made using one of the teardrop beads, one of the acrylic teardrops, a Jet Faceted Glass Abacus bead, and a bead cap.

⇓ REMEMBER TO PIN THIS PROJECT FOR  INSPIRATION AND SHARE WITH YOUR FRIENDS!!

If you like my blog be sure to click on the RECOMMENDED button and SHARE it with your friends! It’s the best way for my blog to grow so I can continue to give you great content. I would love for you to be part of my family so sign up to receive my emails. Every time I post a blog, I will send you an update email. Also, follow me on Facebook HERE,  Instagram HERE and Pinterest HERE.

Come by and say Hey!

September 22, 2022