Have you figured out yet that I really like blue? Today’s tutorial was inspired by these beautiful acrylic silver-plated blue beads. Aren’t they just wonderful? I’ve also been wanting to use the large coin beads for a while so this seemed like the perfect opportunity.
Even though this necklace looks quite impressive, it’s actually quite easy to make, once you master making loops. Loops just take practice and if you need help with that you could watch this video.
To make this blue necklace with the focal bead and dangle, you will need:
*You could use any clasp for this project.
Watch the video or read the instructions below.
To make the dangles on the focal, thread one of the vacuum beads onto a headpin. Make a loop using the 1-step looper or your round nose pliers. Double check that the loop is closed.
If you haven’t got a 1 step looper and have not made loops before, you can watch this video.
Make two dangles using the white vacuum beads and two using the 4mm aqua faceted round beads.
Cut a 9-10cm piece of wire. Make a loop in one end using your 1-step looper. Open the loop and add the dangles that you just made, alternating the colour. Close the loop.
Thread on one of the following beads:
Make a wire wrapped loop at the top of the beads using the round nose pliers. If you have never made a wire wrapped loop before, watch this video.
This necklace is made up of two components. The first uses the bicone and crystal rondelles, the second uses the acrylic bead, silver ball and vacuum bead.
Cut a piece of wire about 6cm long. Using the 1-step looper or round nose pliers, make a loop in one end. Thread on the beads in this order:
Make a loop in the other end.
Cut a piece of wire about 7cm long. Repeat the process as you did for the Crystal Component except that this time you will thread on the beads in this order:
Make a loop in the end.
To make the necklace you need to join two strands of eight of the components you just made. You will use four of each component for each strand.
Open the loop on one end of the Crystal Component and add an Acrylic component. Close the loop. Next, open the loop on the Acrylic Component and add a Crystal Component. Continue until you have four of each component. Repeat for the other side.
To add the focal component to the necklace, open the loop on the end Crystal Component. Thread on the wrapped loop of the focal component. Close the loop.
Repeat for the other side, ensuring that you attach both Crystal Components, not the Acrylic one.
All that’s left to do is attach the clasp. If you’re using one of these magnetic clasps, you don’t need a jump ring, you can just open the loop of the Acrylic Component, pop on the loop of the clasp and close the loop again. Repeat for the other side.
That’s all there is to making this necklace. It takes a while because there are lots of components but it’s well worth it. As I said, it’s not really difficult, the hardest part is the wire wrapped loop, which can take some time to perfect. If you’re having difficulty with wire wrapped loops, you could try using 26 Gauge wire to practice. That might make it easier until you get better at it.
PIN FOR INSPIRATION AND SHARE WITH YOUR FRIENDS!!
If you like my blog be sure to click on the RECOMMENDED button and SHARE it with your friends! It’s the best way for my blog to grow. I would love for you to be part of my family so sign up to receive my emails. Every time I post a blog, I will send you an update email.Also, follow me on Facebook HERE, Instagram HERE and Pinterest HERE.
Come by and say Hey!
September 7, 2021